No Light
If it turns out the issue is on the board and not the screen, which is very likely, repair the backlight circuitry. Basically i expect the issue to be a backlight "filter", or the diode that powers the backlight, which commonly blow when a short or too much current is drawn on the backlight anode line.
Procedure:
1. Remove the small component "filter" (faulty).
2. Make a jumper.
DONE:
THIS POST IS FOR REFERENCE ONLY!
Basic!! But so good.. nice sir al
ReplyDeleteI think this is an informative post and it is very useful and knowledgeable. therefore, I would like to thank you for the efforts you have made in writing this article. Mobile phone repair shop in New York City
ReplyDelete