iPad Mini 1 Removing NAND IC

Removing NAND IC 

NAND, so called because of its use of NOT AND (NAND) gates, is a type of non-volatile memory chip that is used in all iDevices. This chip is where all the storage of the device is located. In the case of iOS, the chips can range anywhere from 4 GB to 512 GB.



QUICK 990AD
TEMP CONTROL - 380
AIR CONTROL - 3

THIS POST IS FOR REFERENCE ONLY!

iPhone X Cannot Touch [DONE]

Cannot Touch Issue

It is happened to almost all Apple iPhone users that all of a snap the touchscreen of your device becomes unresponsive. It doesn't matter how hard you try but the screen simply won't response to any of finger touch. At this point, you realize that the phone is totally not working and completely unusable. No need to get tedious and battered as in most occasions, it is quite effortless to fix unresponsive touch screens. We will list few ways to you to show you how to fix this issue at home without taking your phone to service center.

Procedure:

1. Split the Logic Board.

2. Cleaned and reballed

3. Fixing back the Logic Board.

Done:

THIS POST IS FOR REFERENCE ONLY!

iPad Pro 12.9 iCloud Remove & Memory/Storage Upgrade 32gb to 256gb

iPad Pro 12.9 memory/storage upgrade process involves an easy to use but powerful tool NAND Flash Memory Chip Programmer (JC REPAIR ASSISTANT) for Apple Devices that will enable you to write previous data into the brand new flash drive.
The iCloud security feature has likely cut down on the number of iPhones that have been stolen, but enterprising criminals have found ways to remove iCloud in order to resell devices. To do this, they phish the phone’s original owners, or scam employees at Apple Stores, which have the ability to override iCloud locks. Thieves, coders, and hackers participate in an underground industry designed to remove a user’s iCloud account from a phone so that they can then be resold. 

 

THIS POST IS FOR REFERENCE ONLY!

SM-N950F Rotation/Proximity Sensor Not Working [DONE]

 Rotation/Proximity Sensor Issue

The proximity sensor detects when a user is holding the phone near their face during a call and turns off the display to prevent keypad presses and battery consumption from the display. The proximity/light sensor is located to the right of the earpiece.
This is the common issue for Samsung Galaxy S8/S8 Plus/Note 8.

Procedure:

1. Remove the Proximity Sensor IC.

 

2. Cleaned.

3. Put new Proximity Sensor IC.

Done:

THIS POST IS FOR REFERENCE ONLY!

iPhone 6s Plus No Serial Number [DONE]

Unknown Serial Number Issue

The serial numbers of Apple products contain a codified language that can give you information about your Apple device that can’t be found through any other means everything from the location where it was manufactured, the date it was manufactured, and much more. This information can be valuable for troubleshooting issues with your device or just for curiosity’s sake. So let’s get to breaking down their impenetrable code.

Procedure:

1. Remove NAND IC.

2. Cleaned.

 
3. Need to check the original details/data like SN+WIFI+BT tru online server.
use this server. 

4. Write the details/data using JC Repair Assistant.

5. Put new NAND IC with data.

Done:

THIS POST IS FOR REFERENCE ONLY!

iPhone X (Shorted) No Power [DONE]

No Power (Shorted/Grounded)

Reasons for shorting in circuit motherboard of Mobile Phones

• The most common reason is phone drenched or fallen in water.
• Handset overheating.
• Trying to use an incompatible or faulty charger for charging
• Sparks or smoke coming out of the handset due to any reason.
• Over charging or using while charging. 

Procedure:

1. Use the DC Power Supply, then touch it the part of mother board, which part is getting hot.

2. Remove the Skyworks IC.

3. Cleaned.

4. Put new Skyworks IC.

Done:

THIS POST IS FOR REFERENCE ONLY!

SM-J600G Sim Network Locked [UNLOCKED]

Samsung is Network Locked

The network lock is a type of lock used by network providers like Vodafone, AT&T etc to restrict the use of phones only to their network. So, you are not able to use a SIM card from a different carrier in your country or when traveling abroad. When trying to use a SIM card from a different carrier your phone will require a network unlock code.

Procedure:

1. Download the SamKEY Software.
2. Install and open the software.
3. Login the username and password (6credits).
    Buy the SamKey credits here.

4. Dial *#0808# then select DM + ACM + ADB.

5. Go to setting (USB debugging - ON).

6. Connect to PC and click Read Codes.



7. Enter the codes.  

Done:

THIS POST IS FOR REFERENCE ONLY!

iPhone 5s Upgrade Memory/Storage to 128gb

Upgrade Memory/Storage

iPhone 5s memory/storage upgrade process involves an easy to use but powerful tool  NAND Flash Memory Chip Programmer (JC REPAIR ASSISTANT) for Apple Devices that will enable you to write previous data into the brand new flash drive.

Procedure:

1. Grind the NAND IC, and be sure you have copy of the original details/data like Serial Number, Wifi Address, Bluetooth Address.
2. Cleaned.
3. Write the data (SN,WIFI,BT) using JC REPAIR ASSISTANT.
4. Put the new NAND IC 128gb, im using NAND IC of iPad Air 1.
5. Restore in itunes with latest firmware.

THIS POST IS FOR REFERENCE ONLY!

iPhone 7 Plus Removing BASEBAND IC

Removing BASEBAND IC

The modem firmware number shown in “About” means that there is baseband, if no modem firmware shown in “about” it means there is no baseband, do not insert SIM card and then access dial-up interface to input * # 06 # directly, under normal circumstances, IMEI serial number will be shown same as what you can find in “about” interface.In this iPhone, no IMEI serial number shown when dial * # 06 #, since we’ve already found out that there is baseband in this phone, in this case, no need to consider if it’s caused by the baseband, mostly the problem is caused by the RFF3 bus of baseband.

 

After Removed:

 

QUICK 990AD
TEMP CONTROL - 340
AIR CONTROL - 3

THIS POST IS FOR REFERENCE ONLY!